ENET BMW Diagnostic Interface
OBD2-RJ45
for vehicle diagnostics and coding on BMW F models
Works with E-SYS, Inpa, Rheingold, Ediabas, and Ista-P
1.5 m network connection cable included.
The connection cable can be replaced with any network cable.
This item does not include software.
Important safety information:
Use only for the intended purpose.
This OBD diagnostic cable is intended exclusively for connecting a compatible diagnostic device to the OBD port of BMW vehicles.
Use with vehicles of other brands is not permitted and may result in damage to the cable, diagnostic device, or vehicle.
Check compatibility.
The cable is designed for BMW models with a standardized OBD-II connection (according to SAE J1962 / ISO 15031). An adapter is required for older models (e.g., with a 20-pin round connector).
Only connect when the ignition is switched off.
Only connect or disconnect the cable when the ignition is switched off to avoid damage to electronic components.
Do not modify or repair the cable.
Modifications, repairs, or adjustments to plugs or cables will void the product safety and warranty.
Do not use the cable if the insulation, plug, or contacts are damaged.
Avoid mechanical and thermal stress.
Do not kink, crush, or pull hard on the cable. Keep the cable away from hot surfaces, moisture, oil, and chemicals.
For diagnostic purposes only.
The cable is not a permanent part of the vehicle and must not be used while driving or for permanent connections.
Use only in workshops, testing or diagnostic operations.
Do not use in safety-related systems.
The cable must not be connected to airbag, brake, or other safety-critical systems.
Angaben zur Produktsicherheit
Herstellerinformationen:
Silbernagel-IT GmbH
Domänenweg 7
Bückeburg, Deutschland, 31675
[email protected] https://www.flapcontrol.de
| #productDetails.itemInformation# |
#productDetails.itemValue# |
| Peso del envío: |
0,15 kg
|
